Dva g3672b user manual

You can set up filter rules and disable the entire set of rules without loosing the rules that have been configured. Click the Add button to see the Add Bridge Filter section. Click the Apply button to add the entry in the Active Bridge Filters table.

This page allows the Router to enforce specific predefined policies intended to protect against certain common types of attacks. A DoS "denial-of-service" attack is characterized by an explicit attempt by attackers to prevent legitimate users of a service from using that service. Examples include: attempts to "flood" a network, thereby preventing legitimate network traffic, attempts to disrupt connections between two machines, thereby preventing access to a service, attempts to prevent a particular individual from accessing a service, or, attempts to disrupt service to a specific system or person.

Port scan protection is designed to block attempts to discover vulnerable ports or services that might be exploited in an attack from the WAN. When you have selected the desired Firewall settings by ticking the corresponding check boxes for the various types of protection offered on this window, click Apply.

When you have configured the DNS settings as desired, click the Apply button. The Dynamic DNS service allows a dynamic public IP address to be associated with a static host name in any of the many domains, allowing access to a specified host from various locations on the Internet.

This is enabled to allow remote access to a host by clicking a hyperlinked URL in the form hostname. If for example you are running a public web server or VPN server on your LAN, this ensures that the host can be located from the Internet if the public IP address changes.

You can either point to the Network Tools on the left window and click one of the submenus, or click one of the buttons in the Network Tools window. Click Apply to take effect. Most users will want to leave this on. QoS or Quality of Service allows your Router to help prioritize the data packet flow in your Router and network. This is very important for time sensitive applications such as VoIP where it may help prevent dropped calls.

Large amounts of non-critical data can be scaled so as not to affect these prioritized sensitive real-time programs. Tick Enable Upstream Rate Limit and select a number in the Bandwidth list to control the transmission rate. The information in the table below the selection differs based on the classifications you select.

Tick the Enable check box for each queue configured and enter information in the corresponding fields. Some experimentation may be necessary to achieve the optimum results with your particular ISPs connection. When you are finished, click Apply. UPnP supports zero-configuration networking and automatic discovery for many types of networked devices.

When enabled, it allows other devices that support UPnP to dynamically join a network, obtain an IP address, convey its capabilities, and learn about the presence and capabilities of other devices. UPnP also allows supported devices to leave a network automatically without adverse effects to the device or other devices on the network. UPnP is a protocol supported by diverse networking media including Ethernet, Firewire, phone line, and power line networking.

This window allows the user to set the configuration for ADSL protocols. This configuration works with all ADSL implementations. If you have been given instructions to change the Modulation method used, select the desired option from the Modulation Type drop-down list and click the Apply button. Simple Network Management Protocol is a standard for internetwork and intranetwork management.

You can either point to the Routing on the left window and click one of the submenus, or click one of the buttons in the Routing window. The page allows you to manually enter the routing table. To define a gateway and hop to route data traffic, complete the fields in the Add Static Route section.

Click Apply to see the entry in the Active Static Route table. Select a PVC in the Connection drop-down list. This page can either automatically assign a default gateway to the device or manually type in a default gateway or the device or interface. The Operation setting refers to the RIP request. Select Active to allow RIP requests from other devices. Click the Apply button. Advanced Schedules To access the Schedules window, click the schedules button in the Advanced directory.

You can add schedules in this page and then apply them to Parental Control. Click Add to see the Add Schedule Rule section. Enter a Name for the schedule. Use the radio buttons to click the desired Day s , either All Week or Select Day s in which case you must tick the checkboxes for the desired individual days of the week , select the desired Start Time and End Time or tick the All Day 24 hrs checkbox.

Click Apply to see the entry in the Schedule Rule table. You can set up the basic VoIP settings in this page. All information in this page should be obtained by your ISP. Tick Enable T38 Fax for sending fax data through the network. Tick Enable VAD to disable silent packet and send other transmission. Tick one of forwarding call methods for All, No Answer or Busy calls, and then type a number that calls is forwarded to.

You can also set up the codec priorities in Codec Settings section. Tick the Enable on-board print server check box, enter a Printer Name and Model name in the fields, and click Apply to enable the printer server function. Maintenance System To access the System window, click the System button in the Maintenance directory.

When you configure the Router, you will need to restart the Router to take the settings effect. Click Reboot to restart the Router. Once you have configured the Router to your satisfaction, it is a good idea to back up the configuration file to your computer. To save the current configuration settings to your computer, click the Backup Settings button. You will be prompted to select a location on your computer to put the file. The file type is bin and may be named anything you wish.

To load a previously saved configuration file, click the Browse button and locate the file on your computer. Click the Upload Settings button to load the settings from your local hard drive.

Confirm that you want to load the file when prompted. The Router will reboot and begin operating with the configuration settings that have just been loaded. To reset the Router to its factory default settings, click the Restore Default Settings button.

You will be prompted to confirm your decision to reset the Router. The Router will reboot with the factory default settings including IP settings Use the Firmware Upgrade menu to load the latest firmware for the Router.

Note that the Router configuration settings may return to the factory default settings, so make sure you save the configuration settings with the System menu described above. To upgrade firmware obtained from your ISP, click the Browse button to search for the file. Click the Update Firmware button to begin copying the file. The file will load and restart the Router automatically. In this page, you can choose to change password, manage the service control or IP address control.

There are three different user names for different purpose. User and Admin is to login from LAN. Select a user name Admin, User or Support , type the Current Password in the first field, the New Password in the second field, and enter the password again in the Confirm Password field to be certain you have typed it correctly.

You can configure the idle time between 5 and 30 minutes for the webpage asking you to logout. Tick to enable the services, or deselect to disable them. Enter an IP address and click Apply in the section.

Tick the Enable Access Control Mode check box and click Apply in this section to enable the function. Maintenance Diagnostics To access the Diagnostics window, click the Diagnostics button in the Maintenance directory. This window is used to test connectivity of the Router.

A Ping test may be done through the local or external interface to test connectivity to known IP addresses. The diagnostics feature executes a series of tests of your system software and hardware connections. Use this window when working with your ISP to troubleshoot problems.

The system log allows you to configure local and remote logging, and to view the logs that have been created. To generate a system log, tick the Enable Remote Log check box. Select the Log Level and Display Level from the dropdown lists. Click the Apply button to allow your new settings to take effect. The Wireless Clients window lists out the active Wireless connection when the Wireless function is on. This page displays the event logs of the Router. Click Clear Log to delete all the records.

Status Statistics To access the Statistics window, click the Statistics button in the Status directory. This window also displays information concerning ADSL status. This page displays all the routing rules information. Pular no carrossel. Anterior no carrossel. Explorar E-books. Os mais vendidos Escolhas dos editores Todos os e-books. Explorar Audiolivros. Os mais vendidos Escolhas dos editores Todos os audiolivros. Explorar Revistas. Escolhas dos editores Todas as revistas.

Explorar Podcasts Todos os podcasts. Explorar Documentos. Enviado por Adi Permana. Denunciar este documento. Fazer o download agora mesmo. Microsoft Server Administrator interview questions. Pesquisar no documento. Table of Contents Table of Contents Manual The four LAN ports allow wired connections to Ethernet enabled devices. Phone 1 and 2 ports provide connections to two analog POTS telephones. Click OK. Bing Yang. Saurabh Mahajan. Saeesh Prabhudharwadkar. Geraldo Pereira. Lekshmi Bibin.

Joseph Pagan. Almir Garic. Nelson Rey Laura. Anonymous 2GVabYh40W. Majnu Sm. Wandi Budiana. Siti Baroah. Faizal Gerhani Putra. Nguyen Nam Ha. Mais de Adi Permana. Elizar Nikijuluw. Adi Permana. Titto Alfarizi. Firman Saputra. Populares em Default Gateway. Hafiz Azhar. Felipe Gabriel Nieto Concha. Javier Soto Ledezma. James Heath. Szkreccs Elek. Shyngys Baigurjin.

Avishkar Gote. Daniel David Raj. Anonymous zdCUbW8Hf. Thanh Nguyen. Amjad Ali. Michael O'Connell. Kieran Connolly. Jorge Antonio. Ariel Meza. Luci Ionica. It will blink when the device is synchronizing. Page Quick Setup 1. Configure time and date of the Router. Configure the Internet connection. Configure the Wireless network connection. Confirm the settings and restart the Router. Click the Next button to continue. Select Enable Daylight Saving and configure the daylight saving information, if the area you are located has daylight saving.

Enter values as instructed by your ISP. Click the Next button when you are finished to proceed to the next Setup Wizard window. Deselect Enable your Wireless Network for skipping the wireless configurations. Click Restart to save current settings and restart the Router. Page Setup - Internet Setup 4.

Page 17 Internet connections. If you are using multiple virtual connections, NAT functions system-wide, therefore if it is not selected, NAT will be disabled on all connections. Page 18 When you are satisfied that all the settings are configured correctly, click the Apply button.

This will save the settings. Page 19 Internet connections. Page 20 8. Page 22 8. Page 23 2. You can either point to the Wireless Settings on the left window and click one of the submenus, or click one of the buttons in the Wireless Settings window. Select a wireless protocol in the Click Apply to save the settings.

Select a wireless security mode in the Security Mode drop-down list. Click the Apply button to save the settings. When you are finished, click the Apply button. You can either point to the Advanced Wireless on the left window and click one of the submenus, or click one of the buttons in the Wireless Settings window.

In this page, you can configure more advanced settings of However, it is recommended to remain as default unless your ISP requests to change it. Enter information in the section, and click Apply. Page Advanced - Port Triggering Custom application radio button and entering your own Application Rule in the field provided.

Click Apply when you are finished with the port setting configuration. The new Application Rule will appear in the Port Triggering table. Page Advanced - Dmz Apply button. It will be necessary to save the settings and reboot the Router before the DMZ is activated.

You can either point to the Parental Control on the left window and click one of the submenus, or click one of the buttons in the Parental Control window. To remove a Blocked URL entry in the table, click the corresponding button. To modify a table entry, click the corresponding button, make the desired changes, and then click the Apply button. You can either point to the Filtering Options on the left window and click one of the submenus, or click one of the buttons in the Filtering Options window.

To remove an entry in the table, click the corresponding button. When you have selected the desired Firewall settings by ticking the corresponding check boxes for the various types of protection offered on this window, click Apply. When you have configured the DNS settings as desired, click the Apply button. You can either point to the Network Tools on the left window and click one of the submenus, or click one of the buttons in the Network Tools window.

Click Apply to take effect. Most users will want to leave this on. When you are finished, click Apply.